Tents

Made these tents for What a Cowboy and any RPGs.  28mm.

I plan to add a little storm lantern to the front spar on the large one.

Simple build with bits of linen over folded heavy card, cocktail sticks and brown felt for the blankets.

Then some weathering with a little brown wash.

Dead Trees

Cheap 3d prints from Temu again.
They needed a wash to remove oils, and I drilled them from underneath and glued into the holes some old lead fishing shot. This gave them some weight to stop them moving around on the tabletop.

Simple prime, basecoat and several different dry brushes gave a decent enough result.
Will be good for lots if different games.

Ruins

Found these on the Chinese website Temu.  3d printed, quality is 'ok', but not amazing.  However they were just a few quid, and came out rather nicely.

Primed white. Heavy wash with DIY black wash. Lots of moss and plants. Done :-)

Cactus

Had a friend 3d print these for me in resin. They came out really well.  But one of them snapped off and leaked resin, so after some time under a UV lamp to re-cure the stump, some water rinses, and a foam rock to hide it all, I was able to prime them.

Paint was white primer, Citadel dark green Contrast paint, then a good drybrush with a sandy tone. A sandy base finished them off with a little diluted brown wash here and there to break up the sand colour.  A medium sand colour did for the foam rock.
I'm really pleased with how they came out.

Mine Entrance

A 3d printed Mine entrance for What a Cowboy skirmish game or any RPGs.

A simple grey primer, black paint, then light grey drybrush for the rocks.
A light brown then light grey to try and get that old silvered wood effect on the supports.
A little rust effect on the bolt plates.

Simple but good for fun games. Wont be used a vast amount, but nice to have in the collection.

Castle Ruins

 

Another cheap buy from Temu. 3d Print is 'good enough'.
Another wash with my DIY  'Nuln oil'  and lots of careful plants added.  Looks far better than it has any right to !

Well well well.

Well, its only one well, actually.

A little 3d print I made myself in a 3d design program.  Fun to do but very time consuming.  New respect for designers. 
Paint job came out 'well' enough for the table...(sorry).

Cart

A great model cart.  I liked the wood tones from the laser cutting so much, I skipped wet painting it, and simply added a careful heavy drybrush of grey then brown, and based it on sand.  Love how this came out.

Campfire

Great fun attempting this.  Small stones, tiny twigs, just glued into place on a 25mm base.
The fun part was looking at images of fire and trying to get the black wood, inner glow, reflected light, and flames all correct.

I think it came out ok.  

3d Printed Rocks

Got some 3d prints of more rock formations.  Primarily for "What a Cowboy" games, but again can be for anything.
The low res printing meant some obvious striation lines, but a 50/50 mix of Modge Podge and Black paint heavily painted took out the worst of them. 
Once dried, a heavy grey drybrush finished them off for some quick and easy rocks :-)

Shingle Berms

At Omaha Beach, the troops managed to get a small amount of cover from the "Shingle Berms" that occured naturally on the beach.
I belive there was a main one just below the main German defence bunkers.
I made x8 to represent this on beach assault tables.  Its mainly just representative, so could work for 15 or 28mm I guess.

Made these with a rough carboard 'mold' of sorts.  Took a while to dry but are very solid. 

Hedges

 Some more hedges I made a while back. Made x4 of these. Came out nice.
 Scouring pads on large lolly sticks with flock :-)

Rocks

I wanted to make some rocks for ages.
Playing What a Cowboy finally pushed me to do it, but rather than the pale khaki desert colours, I plan to do them light greys, so I can use them for more varied games.

The process...

Cutting and shaping the foam scraps

Getting them glued up and based.

Stone circle for RPGs perhaps?

Sealed with ModgePodge then gravel based

Heavy coat all over with 50/50 mix of ModgePodge and black paint.

Half way through Dry Brushing.  Nice to see the difference.

Drybrushing all finished. Just going to add some dead grass tufts.

All done.  Happy with these. Made more than shown here (13 in total).

Ruins

Made a couple of these Ruins for 40k and modern games.  Cut from thin plywood and sprayed up with a little gravel added, they are simple but effective.

Hedges

Made some basic 2d hedges from mdf sheet.  The idea was to have some more 'soft' cover for games like Asymmetric Warfare. 

Quite basic but fun to make and great to throw down some fast extras.

FoW - Trenches

Trenches for flames of War.
I made these a long time ago, but sadly now the new version of Flames (v4) doesn't use them I think.
Still, they were as cool build, and I'm sure they'll be usable for other things :-)

Fow - Walls

Some walls I made myself for Flames of War.
One of my gaming buddies Cilla, suggested using cheap small Jenga game blocks for walls, so I bought a couple packs for just a couple quid.
Glued x3 to wide lolly stick. Attacked top edge with a sander. Based. Painted. Done.
Easily used for both 15mm Flames of War, up to 28mm wargames.